Skid steer loaders are also known as skid steers, multi-purpose vehicles, and multi-purpose engineering machines. It is a wheel-type OR tracked type special chassis device that uses the speed difference between the two wheels to achieve vehicle steering. It is mainly used in occasions where the job site is small, the floor is uneven, and the job content is frequently changed.
Suitable for infrastructure construction, industrial applications, dock handling, urban streets, houses, barns, barns, airport runways, etc., but also can be used as a large-scale construction machinery auxiliary equipment. There are two types of skid steer loaders: wheeled and tracked.
MODEL | HJ618T |
H2 Maximum pin shaft height | 1942mm |
H3 Maximum pin shaft height | 2200mm |
Q3 Maximum discharge angle | 30° |
Q2 Bucket take back angle | 26° |
departure angle | 10° |
H Max height | 1370mm |
H1 ground clearance | 140mm |
L1 Wheel base | 600mm |
L3 Length without bucket | 1750mm |
B2 Max width | 750mm |
B1 Bucket width | 740-800mm (adjustable) |
L Max Length | 2170mm |
Engine :Original briggs & stratton | |
Rated power | USA B.S Gasoline 10.5KW(13.5HP) |
Emission standard | EPA4 tier/Euro V tier |
Noise | ≤95Db |
Hydraulic system | |
Pressure | 17Mpa |
Working time | |
Lifting | 5.6s |
tipping bucket | 3s |
Down | 3.6s |
Bucket capacity | 100-150Kg |
Bucket volume | 0.07m³ |
Max lifting force | 215Kg |
Speed rate | 0-6Km/h |
Operaring weight | 660Kg |
Tire size | 5.00-8 or rubber tracked |