No.6 Hongkong Middle Road, Qingdao, China
Features of our cargo handler:
1. Isuze engine from Japan.
In low fuel consumption area, vehicle fuel consumption can be reduced by more than 15%, dynamic response is fast, and time saving
2. Inline system from Germany.
3. Bucket 3CBM clam.
4. Special arm & boom for loading and unloading material and cargo.
5. More reliable and durability.
6. High efficiency and Economic.
It also saves effort. The efficiency of the whole vehicle can be increased by 5%. The intelligent electronic control is adopted to reduce the noise significantly.
7. More comfort and higher safety.
Operation is more comfortable, and engine noise can be reduced by 50%.
8.Two system for Diesel and Electric.
9.Adopt well-known brand hydraulic system, and optimize the system by setting the action priority
Throttling, better operability, and more precise action. Oil when boom lifting and bucket digging
Converge inside the valve to improve work efficiency; the stick has a regeneration function to speed up the bucket
10. World-renowned hydraulic system.
11. Convenient maintenance.
12.Versatile, can be equipped with breakers, augers, wood grabbers,multi peel bucket ,slings for lifting loads crane magnet,Paper roll grab, Wire coil hook...
13.easy to use.
14.Simple maintenance, low maintenance costs.
| Item | HJ520 |
| Weight （Ton） | 48.5 |
| Bucket (m3) | 2.8 |
| Engine | 日本五十铃6WG1 |
| Engine power (kw/r/min) | 300/1800 |
| Fuel tank capacity (L) | 650 |
| Move Speed (km/h) | 4.8/3.0 |
| swiveling speed (r/min) | 8.6 |
| climbing capacity (%) | 70 |
| bucket digging force(KN) | 298 |
| Ground specific pressure(KPa) | 86 |
| Max flow rate（L/min) | 414x2 |
| Working pressure (MPa) | 34.3 |
| Hydraulic oil tank capacity(L) | 335 |
| A-Length (mm) | 11600 |
| B-Width(mm) | 3340 |
| C-Height (swing arm top)(mm) | 3780 |
| D-Height (cabin top ) (mm) | 3280 |
| E-counterweight ground clearance(mm) | 1300 |
| F-Min ground clearance (mm) | 720 |
| G-Tail rotation radius(mm) | 3845 |
| H-Track grounding length(mm) | 4360 |
| J-Track length(mm) | 5390 |
| K- track gauge(mm) | 2740 |
| L-Track width(mm) | 3340 |
| M-track shoe width(mm) | 600 |
| N-Turn the width of the table(mm) | 3240 |
| O-Max dig height(mm) | 10000 |
| P-Max discharge height(mm) | 6660 |
| Q-Max dig depth(mm) | 6260 |
| R-Maximum vertical dig depth(mm) | 5620 |
| T-Max dig distance | 10580 |
| U-Max dig distance at the ground plane(mm) | 10360 |
| V-Min radius of gyration(mm) | 4825 |
| W-Max height at the min radius of gyration(mm) | 9250 |
| X-Distance from the rotation center to the posterior end(mm) | 3845 |
| Z-Balance weight height(mm) | 2860 |
| A1-Ground length(transport)(mm) | 6520 |
| Bucket pole length(mm) | 2550 |
| swing arm length (mm) | 6560 |
